MP35N Alloy Steel
MP35N ALLOY DISTRIBUTOR IN THE USA
Ratnam Steel is a distributor of MP35N Alloy in any size or form and specifications as noted below. MP35N is a nonmagnetic, Nickel-Cobalt-Chromium-Molybdenum alloy. This alloy has been used in a variety of applications such as nonmagnetic electrical components, springs, fasteners, medical and dental devices, oil and gas wells. Check availability with our sales department by submitting your inquiry below to see if Ratnam Steel can provide your MP35N Alloy metal requirement.
Forms and Shapes Available
MP35N Alloy Steel Coil / MP35N Alloy Steel Foil / MP35N Alloy Steel Strip: Flat Rolled
MP35N Alloy Steel Extrusions, AMS-5844*
MP35N Alloy Steel Extrusions, AMS-5845*
MP35N Alloy Steel Fasteners, AMS-7468
MP35N Alloy Steel Fittings
MP35N Alloy Steel Flanges
MP35N Alloy Steel Forgings
MP35N Alloy Steel Half Oval Bars, AMS-5844*
MP35N Alloy Steel Half Oval Bars, AMS-5845*
MP35N Alloy Steel Half Round Bars, AMS-5844*
MP35N Alloy Steel Half Round Bars, AMS-5845*
MP35N Alloy Steel Hexagonal Bars, AMS-5844*
MP35N Alloy Steel Hexagonal Bars, AMS-5845*
MP35N Alloy Steel Octagonal Bars, AMS-5844*
MP35N Alloy Steel Octagonal Bars, AMS-5845*
MP35N Alloy Steel Pipes, Seamless, AMS-5844*
MP35N Alloy Steel Pipes, Seamless, AMS-5845*
MP35N Alloy Steel Rectangular Flat Bars, AMS-5844*
MP35N Alloy Steel Rectangular Flat Bars, AMS-5845*
MP35N Alloy Steel Square Bars, AMS-5844*
MP35N Alloy Steel Square Bars, AMS-5845*
MP35N Alloy Steel Threaded Bars, AMS-5844*
MP35N Alloy Steel Threaded Bars, AMS-5845*
MP35N Alloy Steel Tubes, Seamless, AMS-5844*
MP35N Alloy Steel Tubes, Seamless, AMS-5845*
MP35N Alloy Steel Tubes, Seamless, ASTM-F-562*
MP35N Alloy Steel Wire, AMS-5844
Approximate Chemical Composition [%]
Nickel [Ni]: 33.00 – 37.00
Cobalt [Co]: Balance
Chromium [Cr]: 19.00 – 21.00
Molybdenum [Mo]: 9.00 – 11.00
Titanium [Ti]: 1.00 max
Boron [B]: 0.01
Carbon [C]: 0.25 max
Iron [Fe]: 1.00 max
Manganese [Mn]: 0.15 max
Silicon [Si]: 0.15 max
Sulfur [S]: 0.01 max
Phosphor [P]: 0.015
Mechanicals At Room Temperature
Ultimate Tensile Strength: 180 KSI min or 1,241 MPa min
Ultimate Yield Strength: 115 KSI min or 793 MPa min
Hardness: HRC 36 max
Elongation: 12% min
Physical Constants
Density: 8.43 g/cm³ or 0.304 lb/in³
Melting Point Range: 1440°F – 2625°F
Coefficient of Expansion: 12.8 µm/m °C (20 – 100°C) or 7.1 x 10-6 in/in °F (70°F – 212°F)
Modulus of Rigidity: 80.7 kN/mm² or 11,705 KSI
Modulus of Elasticity: 234 kN/mm² or 33,939 KSI
Properties
~ Corrosion resistant at ambient temperatures
~ Good mechanical properties at elevated temperatures
~ Oxidation resistant
~ Precipitation hardenable
Known Tradenames
Carpenter MP35N Alloy, Latrobe MP35N Alloy, AWS 110, W. Nr. 2.4973 UNS-R30035