Rene 41 Alloy
RENE 41 ALLOY DISTRIBUTOR IN THE USA
Ratnam Steel is a distributor of Rene 41 Alloy in any bar size or form and certain sheet sizes per specifications as noted below. Check availability with our sales department by submitting your inquiry below to see if Ratnam Steel can provide your Rene 41 Alloy metal requirement.
Approximate Chemical Composition [%]
Nickel [Ni]: Balance
Chromium [Cr]: 18.00 – 20.00
Molybdenum [Mo]: 9.00 – 10.50
Titanium [Ti]: 3.00 – 3.30
Boron [B]: 0.003 – 0.010
Carbon [C]: 0.06 – 0.12
Iron [Fe]: 5.00
Cobalt [Co]: 10.00 – 12.00
Manganese [Mn]: 0.10 max
Silicon [Si]: 0.20 max
Aluminum [Al]: 1.40 – 1.60
Physical Constants
Density: 8.248 g/cm³ or 0.298 lb/in³
Melting Point Range: 2400°F – 2500°F (1316°C- 1371°C)
Specific Heat: 0.108 Btu/lb °F (452 J/kg °C)
Modulus of Rigidity: 83.2 kN/mm² or 12,067 PSI
Modulus of Elasticity: 218 kN/mm² or 31,619 PSI
Properties
~ Good mechanical properties at elevated temperatures
~ Corrosion and Oxidation resistant
~ Precipitation Hardenable
Forms and Shapes Available
Rene 41 Extrusions, AMS-5712 *
Rene 41 Extrusions, AMS-5713 **
Rene 41 Half Oval Bars, AMS-5712 *
Rene 41 Half Oval Bars, AMS-5713 **
Rene 41 Half Round Bars, AMS-5712 *
Rene 41 Half Round Bars, AMS-5713 **
Rene 41 Hexagonal Bars, AMS-5712 *
Rene 41 Hexagonal Bars, AMS-5713 **
Rene 41 Octagonal Bars, AMS-5712 *
Rene 41 Octagonal Bars, AMS-5713 **
Rene 41 Rectangular Flat Bars, AMS-5712 *
Rene 41 Rectangular Flat Bars, AMS-5713 **
Rene 41 Round Bars, AMS-5713 *
Rene 41 Sheets, AMS-5545, GE B50TF109 Class C Rev S7
Rene 41 Square Bars, AMS-5712 *
Rene 41 Square Bars, AMS-5713 **
Rene 41 Threaded Bars, AMS-5712 **
Rene 41 Threaded Bars, AMS-5713 ***
Rene 41 Tubes, Seamless, AMS-5712 **
Rene 41 Tubes, Seamless, AMS-5713 ***
Rene 41 Wire, AMS-5800
Known Tradenames:
Rene 41, Alloy 41, Alloy R41, Cobalt Alloy R41, Haynes R41 Alloy, UDIMET Alloy R41, Pyromet Alloy 41, TURBALOY 41, AWS 120, W.Nr. 2.4973, UNS-N07041